Start here to get the most out of your paint project. Priming your surface is easy to do and helps to achieve better results. This all-purpose white spray on primer increases paint adhesions, smoothes uneven surfaces and ensures that true paint color is achieved. It may be used on most surfaces, including ceramic or plaster, glass, masonry, metal, paper, papier mache, plastic, rubber, wicker and wood. In a 12 oz. spray can.
Montana Cans prides itself on the Limited Edition Artist Series. Each can features a world-renowned artist that has the opportunity to design personalized artwork for their favorite Montana BLACK color. These designs are then implemented for a limited time in the production of the artists chosen color, making any versions of the Artist Series exclusive, functional and collectible. These designs will be only be featured four times a year so grab them while supplies last!
Montana Black cans feature nitro-combination based paint in a high-pressure can that provides excellent control and handling. The low-odor, non-drip paint formula has a short drying time allowing for rapid re-application and overlapping of colors. The cans are compatible with all cap types and consistently make perfect lines. They are also winter-proof, achieving optimal performance even in cold climates. Available in powerful, high-covering matte finish colors that can be applied to any surface.
This combination Nitro-Combi & Tar-Mix can is the perfect high pressure 400ml can to cover any chrome effect or metallic colors, wet or dry. The BLACKOUT Tarblack itself has an extremely fast drying time of around 2 minutes in conditions 15° celsius or higher. This is about 3 times faster then normal tar products. With it's pigmented matte black tar formula, it also offers a rich black finish, as opposed to the prominent brown undertones you may be used to from other brands. Loaded with the Black/Orange dot fat cap, be prepared to cover large surface area rapidly and cleanly. Particularly good on non-primed surfaces where paint would usually be absorbed, the BLACKOUT Tarblack leaves behind a beautifully opaque clean line. (Allow to dry completely before painting over.)
Montana Chalk Sprays feature the look and feel of a rough chalk effect. These environmentally friendly chalk-based pigment sprays are ideal for temporary outdoor markings as well as for indoor studio artwork. This is a great medium for events, advertisements, marketing campaigns and outdoor activities. Studio artists will find new possibilities with these colorful deep-matte high-covering chalk pigments. They can be applied on various surfaces such as sidewalks, walls, cardboard and canvas. The chalk markings will last from days, to several weeks, depending on climate and weather conditions. Markings will fade quickly during extended periods of rain and in high-traffic areas. Contents are non-hazardous to plants, and therefore ideally suited for use in the garden and landscaping. The chalk color pigments will wash away faster on non-porous surfaces like glass or metal, but can be finished and sealed with spray varnish to create long lasting permanent effects.
Crackle lacquer is a laquer for the special crackle effect to create a faux-vintage or used look. Objects to be painted with the Crackle Effect require a base coat of primer first then paint with the selected base color to show through the Crackle Effect. Let the base color dry at least 45 minutes but no more than 24 hours before applying Crackle Effect from a distance of six inches from the surface. After extensively and evenly applying Crackle Effect to your primed and painted surface, the distressing (cracking) process will begin to occur. For finest crackling results, apply to a completely dry base coat. If base coat is still wet when Crackle Effect is applied, the crackling effect will expand to a larger scale. Crackle Effect spray is high-covering and can be top-coated when completely dry and cured. For best results, use with Montana GOLD as the base coat.
Frosted Glass spray paint dries in 3-5 minutes to a semi transparent, frosted matte finish. With a light coating, light will still pass through painted glass. The paint is Nitro-Acrylic-Combi based and delivered under low pressure. The cans feature a Flat Jet spray nozzle for ease. Not recommended for use on acrylic or plexiglass surfaces.
Glossy translucent paint with colored glitter particles for a metallic effect giving objects and artworks of all kinds a refined finish. Applicable on many different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials. After being applied, a thin shiny lacquer coat will show with a fine distribution of glitter particles. Further coats will lead to a higher density of particles and intensify of the effect. Finish your project with the Montana VARNISH Gloss to enhance the metallic effect.
Water-based special effect spray paint with fine plastic particles for a deceivingly realistic granite effect. Applicable on many different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, polystyrene and other paintable acrylic materials. The Montana GRANIT Effect is very high covering. For best results, prime your surface when using light colored GRANIT Effect shades, particularly when painting on dark surfaces. We recommend using the Montana PRIMER or the Montana TEXTURE spray. The latter will enhance the GRANIT look even more. Can be top-coated once thoroughly dry. Can be combined with Montana GOLD, Montana ACRYLIC markers and standard acrylic paints.
Add a totally new dimension to creativity with a holographic touch. This spray paint has a semi-gloss, translucent base, upon which high-quality fine holographic glitter particles reflect light and show a rainbow of color depending on the angle of view. The more layers applied, the more intense the effect will become. It can be applied over or under other acrylic paint layers, and the effect can also be used to manipulate the look of other paints. Apply this spray to paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and just about any other paintable surface. Just make sure to re-shake the can after each spray to guarantee the pigments are correctly mixed with the paint vehicle. This product will add an intergalactic feel to any artwork, creative or DIY projects. Hologram Glitter Effect spray can also be intensified by coating with Montana GLOSS Varnish once cured. Adding the gloss layer will appear to reflect more light and thus appear to magnify the variation in the holographic effect. It will also protect and increase the longevity of the surface painted.
High-covering spray paint for a deceivingly realistic marble effect. Can be used on many different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials. The Marble Effect can comes standard with a calligraphy cap that can be adjusted to create spray output both vertically or horizontally.
The Montana Metallic EFFECT Sprays bring state of the art paint technology to traditional metallic effect colors. Loaded with a Montana Standard cap, these cans provide excellent delivery and reliability under medium pressure output. Not only are the colors ideal for application on functional objects such as bikes and furniture, they can also add a metallic flare to any creative or artistic project on paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials. Made from an Acrylic-Nitro combination base, the paint surface dries to a durable semi-gloss finish which is both hard wearing when cured (24+ hours) as well as flexible. Offering great lightfastness, the Montana Metallic EFFECT line can also be combined with the Montana GOLD, Montana BLACK and Montana ACRYLIC marker lines.
Montana Gold provides superb handling along with the most extensive range of 204 colors in flowing gradients for shading; perfect for photorealistic works. The flexible, acrylic-based matte formula works well on wood, concrete, metal, plastic, canvas, glass and many other surfaces.
Montana Night Glow is a high-grade acrylic spray paint that contains luminescent pigments that absorb and store light particles, then emit glowing-light in darkness. The intensity and length of the glow period depends on the thickness of paint layer applied. It is recommended to apply multiple layers of Night Glow over a well-primed white surface. The glowing effect will be strongest immediately after charging the painted surface with a strong light source and then exposing the painting to complete darkness. This paint works great for indoor and outdoor applications. It is suitable for all smooth, rough or light responding primed surfaces such as metal, wood, hard plastics, primed cardboard, walls and more. It has limited resistance to weathering, light and UV-influences. To improve resistance, it is recommended to varnish the finished piece with Montana Varnish Gloss (MXT-T1000). Night Glow works the best with any of the Montana Fat Caps.
Montana Primers enable excellent adhesion and further coating of synthetic, nitro-combi or acrylic spray paints. These primers can be used on a variety of surfaces that need to be pre-treated such as plastic, metal and Styrofoam. The Universal Primer works especially well on leather, cardboards, wood and many other materials. After the primer has been applied to a surface and dries, it can then be painted. Primers are used for more efficient and permanent results. It is easy to apply, sand and re-coat.
Montana Cans feature a cap system with a variety of interchangeable caps that allow artists to customize spray width on the same spray can to achieve different effects for different projects. Cap nozzle sizes range from ultra-thin, for detailed work, to extra-fat for covering large surface areas.
Montana Remover is a non-pollutant, pH-neutral etching spray that dissolves and removes lacquers quickly and thoroughly. It works great on walls, clay bricks, stone, concrete surfaces, marble, bitumen, glass, metal and wooden surfaces. Do not use on cars! This spray has a gel-like consistency that prevents it from running off of vertical surfaces. Application on non-ferrous metals might cause discoloration. Use on clean, dry surfaces and let sit for at least 10-15 minutes before scraping off. Repeat if needed.
400ml can of gray texture spray to generate sculptured impasto surfaces. Suitable for creative works of all kinds, as well as filling material to patch up small irregularities such as cracks, holes or as a foundation. Can be applied to many different surfaces such as wood, glass, stone, ceramics, porcelain, acrylic and other non-elastic surfaces. By spraying your object with a thick layer of the TEXTURE spray, the foundation will be coated with a high-grade, well adhering substance that can be molded while wet to achieve the desired structure. After thoroughly dry and cured, TEXTURE spray can be top-coated with many common lacquer types. TEXTURE spray offers increased anticorrosive protection to the surfaces it is applied to.
These acid-free, quick drying, clear varnishes are each made from an acrylic base. They work great for art, hobby, crafts and DYI projects. They protect and fix paint onto surfaces like canvas, paper, charcoal drawing, fiber, wood, photos and more. The varnishes work well for both interior and exterior uses, have no yellowing or desaturation and protects against oxidation. They are not compatible with synthetic base lacquers.
An ideal tool for contemporary urban calligraphy and ultra wide line work, the 750ml Ultra Wide can has a spray width variation of from 6" if applied rapidly at close range, to approximately 24" if applied slowly at a greater distance. The ultra high-pressure cans feature a specially developed yellow ultra wide calligraphy spray cap, set in a horizontal spray position. The specialized cap enables users to maximize vertical stroke application and achieve a high vertical spray reach of up to 6.5 feet. A large surface area can be covered in exceptionally fast time. Due to the high pressure within the cans, artists should beware of wide output and counterstroke. Not to be sprayed near electrical power sources.
Montana UV-EFFECT is a transparent effect paint that is only visible under direct UV light. This EFFECT paint is able to be applied on almost any surface. The colorless and semi-gloss paint is not visible in sunlight, but illuminates when exposed to UV light with a glowing, blue-purple color.
Opacity-optimized, high-covering gloss spray colors in a 400ml high-pressure can. These versatile colors are made with a synthetic lacquer base and dry quickly, making them ideal for artists, crafters and hobbyists alike. Covers most surfaces. Compatible with all Montana caps.
Montana WHITEOUT is the ultimate white-colored street painting experience, developed specially for the graffiti user. This super-covering, brilliant white has a matte finish that is sticker-like in appearance when dry. Fast and smooth with superior handling, this white is the ultimate multi-tasker that can be used for filling in, outlining or the brightest of highlights. Excellent in combination with other graffiti-specific tools. (Please note: this is not a tar-based product!)
MTN Water Based Spray Paints are formulated with low-odor water-soluble resins and pigments of the highest quality. Highly recommended for fine arts, graffiti art and many other professional jobs. Perfect for indoor work. Suitable for use on all types of surfaces, including polystyrene. Fresh stains can be removed with just soap and water during the first 20-25 minutes. Waterproof once dry. Solid durable matte colors, featuring great resistance and opacity for all types of applications. Fluorescents that are intense and bright, and react to exposure to black (UV) light. Metal Colors featuring metallic pigments and resin for great coverage and intense shine without staining. Semi-transparent colors of low opacity suitable for creating volume, glazing and effects. Transparent Varnishes for universal use. Suitable for protection of all kinds of surfaces.
MTN Water-based Spray Paints are formulated with low odor resins, which are water-soluble and with pigments of the highest quality. Highly recommended for fine arts and students. Perfect for indoor work. Suitable for use on all types of surfaces, including polystyrene. Fresh stains can be removed with just soap and water during the first 20 - 25 minutes. Waterproof once dry. Solid durable matte colors, featuring great resistance and opacity for all types of applications.
This textured aerosol finish gives projects the beauty of natural stone with an elegant and durable finish. It is fast drying, durable for both indoor and outdoor use and UV fade resistant. This stone finishing spray can be used on wood, metal, wicker, glass, craft foam, masonry and ceramic.
This short 3 oz. can is the perfect size for small painting projects. The paint is fast drying and has a high-gloss finish. It is great for arts, crafts and hobbies and is acid-free/archival safe. Recommended surfaces include ceramic/plaster, craft foam, florals, glass, metal, paper, papier mache, plastic, wicker and wood.
Providing vibrancy, permanence and performance, Liquitex Professional Spray Paint delivers high coverage and opacity. The line's extensive color spectrum includes transparents, iridescents and fluorescents. Fifty of the colors are matched to core Liquitex Heavy Body and Soft Body colors with additional hues added for a comprehensive offering. Black and white have been added to selected colors to create a complete tonal spectrum. Using innovative water-based technology, this spray paint is low-odor and does not carry the skin or eye irritant warnings associated with other spray paints. It cleans up with water when wet and is permanent when dry. The paint is versatile enough for use on almost any substrate, including canvas, wood, masonry and glass. It is fully intermixable with other Liquitex ranges. Available in 400ml cans.
This innovative can allows artists to use Tarblack in "skinny mode". Engineered to allow optimal performance with skinny caps for the clean application of outlines and details. The 500ml can comes equipped with a Fat Cap White/Pink for tight wide lines. It is winter-proof, achieving optimal performance even in cold climates.
Create spider-web like effects with the high-pressure output of this spray color can. Use the standard cap for broad spider web-like marks or swap it for a Skinny Cap and create rough, pencil thin lines for rendering or dribbling effects. Excellent for calligraphic techniques. Available in Silver or Black.
Water-based, matte finish paint that is fast drying and highly opaque. Developed for use in temporary markings on non-porous surfaces (construction, sports events, film decoration, children's games, temporary decorations, etc.) and situations where an easily removable spray paint is required. Resistant to wear.
The all new redesigned MTN Poltergeist Glow in the Dark spray paint is now renamed MTN Colors Luminous Paint! Looking for something special? The Montana Colors Luminous Paint (Glow in the Dark spray paint) is a unique product that glows once charged by light. It Glows giving off a green glow that is perfect for many spooky projects or just illuminating any object or artwork at night! Sprays on almost clear.
Chloride-free paint remover, suitable for removing old paints, or effortlessly cleaning painted parts. Spray on the surface that needs to be cleaned and leave it for a minute or two. Rub vigorously until the surface is clean and rinse with clean water. Repeat as necessary. Allow surface to dry before re-painting. Not suitable for cleaning skin and hands.